Iron Man News

Iron Man is a anime/manga character in the Marvel Mangaverse franchise
| |

Welcome to Featured Figures; a blog feature highlighting a handful of figures, my thoughts on them, the dents they'd leave in your wallet and maybe even links to sites you can buy them from. Let me know what you want to see from these blogs and I'll see what I can do.

After getting some good feedback across all the sites I'm keeping this blog feature going, now featuring figures spanning across anime, comics, movies and video games. Something for everyone.

This post is best viewed in blog format.

Missed out last time? Check out Featured Figures #01 here!

Chie Satonaka, Figma (Max Factory)

Strike a pose, Chie
Strike a pose, Chie

It's my understanding that there are possibly a few Chie fans out there, so here's one for you guys; the Chie Figma by Max Factory.

Chie comes with a variety of different faces and accessories you can swap around to your liking. She's also posable, so other than changing her outfit you can pretty much get her looking exactly how you want. She comes with a standard face, a shouting face and even a Shadow Chie face. Accessories include glasses, joke nose glasses and a swoosh effect piece to attach to her leg for some kicking action. Looks like a nice figure with a lot of options.

As a side note, if you dig some good cosplay there are a couple of different Chie sets in the cosplay thread.

Chie can be pre-ordered for $46.79 (approx £30.41) on YesAsia

Samus Aran, Figma (Max Factory)

Don't mess with this chick
Don't mess with this chick

Since several people mentioned in the previous blog that they prefer a fully suited-up Samus over Zero Suit Samus, here's another figma by Max Factory of just that; Power Suit Samus from Metroid: Other M.

Like the Chie figure, Samus comes with several bits and pieces to customize her with. Included is a Morph Ball, two different beam effects (single and double-shot), an opened canon tip (as if she's firing missiles) and a few different hands; open, closed and thumbs-up.

As you can tell from the images this figure is very posable, equipped with a figma stand to keep her up so you can recreate just about any of the well-known poses Samus has done over the years.

Samus can be pre-ordered for $55 (approx £35) on Hobbyfan

Iron Man Mark VII, ARTFX Statue, 1/6 scale (Kotobukiya)

Iron Man: Destroyer of Concrete
Iron Man: Destroyer of Concrete

Taking the bad-ass award this week is the Avengers Iron Man Mark VII ARTFX Statue by Kotobukiya. Tony's on the seventh version of his Iron Man suit already? Dude works fast.

No articulation or custom pieces here folks, this is just one solid, shiny, high quality statue. I think it's actually kind of harder to get figures like this and Samus wrong in a lot of ways. Faces are hard to get right, especially real faces. Robot-suits like these are more mathematical - make everything the correct shape and size and you're set. Even so, this thing looks amazing. The ripped-up concrete beneath Tony's feet here really completes the package. Makes Iron Man look super-heavy and powerful.

Oh, his chest and eyes also light up, as if the damn thing wasn't cool enough already.

Here's a question: who wins in a fight between Samus and Iron Man? I like Samus as much as anyone else, but I think I'd have to give that one to Iron Man. Maybe they should put him in the next Super Smash Bros. game...

Iron Man can be pre-ordered for $130 (approx £82) on Amazon

Natsu Dragneel, HQF, 1/8 scale (Tsume)

Even in anime, few dudes can pull off pink hair
Even in anime, few dudes can pull off pink hair

My love for Fairy Tail is no secret. I like to think of it as Bleach and Naruto's cheeky little brother that runs around causing mayhem, it's a fun show to watch with a ton of likeable characters. I was pleasantly surprised to see some good Fairy Tail figures coming out, starting with this Natsu Dragneel HQF (High Quality Figure) by Tsume.

As a Fire Dragon Slayer, the plastic fire engulfing Natsu's hand is a great touch, it could have been a solid red or orange colour, but the mixture of orange and yellow and the red tips make it look really nice. The hair and attention to detail on the scarf look particularly good too.

The detail on the eyes and teeth is something I haven't seen much of before. It looks like someone drew the face with a fine marker pen or something. I usually prefer the sort of stuck-on pre-printed eyes you see on a lot of anime figures over painted ones, but it works pretty well here I think.

Natsu can be pre-ordered for €79.90 (approx $105 or £66) on tsume-art

Yoko Littner, 1/8 scale, Bounty Hunter Ver. (Alter)

The holster is the most practical thing on her
The holster is the most practical thing on her

The last featured figure this week is the Yoko Littner "Bounty Hunter" figure by Alter. I haven't watched much Gurren Lagann so I don't know if Yoko actually dons this outfit at some point in the anime, but it's a cool figure regardless.

Yoko, being as popular as she is, has been rendered in plastic many times, but this figure is definitely up there as one of the best. Judging be the huge burn-holes in her overcoat she's been having a rough time, though other than a few bandages around her right hand her body is relatively unscathed. Yoko's enemies need some target practice.

Strangely enough the thing that jumps out at me most is Yoko's gun holster. They really nailed the leather look with that, the fake stitching looks great and the strap around her leg is a nice little detail that could have been left out, but wasn't. The sizes of the guns seems a little off though. The pistol looks huge and Yoko's trusty sniper rifle looks a little smaller than usual (it usually looks considerably bigger than her). Maybe it's just too big on other figures, either way these are small complaints in the grand scheme of things.

Yoko is listed at $105 (approx £66) on Hobbyfan but is currently sold out.

What do you think of the selection this week? Would Iron Man beat Samus in a fight? Already ordered a Chie figure of your own?

Daniel Newton is a moderator for Anime Vice and Screened. Follow him on twitter: @Daniel_Newton and @AnimeVicers

Other posts: • Dragon Ball Z Kinect Game AnnouncedFeatured Figures #01Oreimo Season 2 Announced!

| |

Something I Was Paid to Draw

This was a little something that I was hired to draw a while back. I'm only just now sharing it with the Whiskey Media communities. I got a PM on my devArt account asking me to draw both Iron Man in his latest Bleeding Edge Armor and the Code Geass protagonist Lelouch Lamperouge in his final Knightmare Frame(KMF) the Shinkirou. It's a combination of two of his favorite characters. I think this is probably one of the first crossover images that I've ever been asked to draw.

The hardest part to plan out was how to draw this and have Lelouch be seen, since the KMFs have enclosed cockpits. I figured that since they were fighting, I'd make it look as if the cockpit was damaged and the top flew off at some point.  Not wanting to make this seem to be a one-sided fight, I also gave Iron Man some battle damage. I made the setting in the skies above the Area 11 settlement. I thought it would be more visually interesting than putting it in some blank sky or above the ocean. It also gives a sense of scale.

This was originally drawn in pencil on paper. I scanned that and digitally inked it with my new graphic tablet. The color work was also done on the tablet. The background was all painted freehand on the computer. I wont go into how much I was paid for this, because that seems in poor taste. The hardest part about this was drawing the Bleeding Edge armor. Even with Comic Vine's extensive image library, getting images of the back wasn't easy and so many images were colored so dark that I couldn't make out any real detail. I just took a general idea and made up the rest. The Shinkirou came out looking pretty sharp in this picture.

People seem to enjoy the image. Though, most of the comments I've been getting as been a debate about who would win this fight. It would be cool to get more commissions such as this. I'd like to hear your thoughts.

The size is limited on this site, but you can see the full sized version on my deviantArt account: HERE

-Kristoffer Remmell ( FoxxFireArt) is a freelance graphic artist, writer, and over all mystery geek.- Follow for news updates: @ animevice / @ FoxxFireArt
| |
Wolverine Anime 
Iron Man Anime
I think I like Iron Man more. Thoughts? They will both be appearing on G4 in 2011
Pokemon Black and White Looks Delicious in Motion

First video of a Pokemon battle in Black and White.

Comment & Win: One Piece Vol. 52, 53

Time for a giveaway folks! Now, act civil, we don't want anyone to get hurt in the mad rush to win.

Beginner's Guide to FLCL

Gainax's madcap, surrealist anime, broken down for new viewers.

Ballz Deep

Steve gets intimately close to Dragon Ball Z, for science!

Top 3 Awful Anime Dubs

Grit your teeth and get your ear plugs ready cause this week we're taking on the three most amazingly bad dubs of all time!

HAYATE THE COMBAT BUTLER #1 -- Special Review

“God Bless Us, Every One”

HAYATE THE COMBAT BUTLER #2 -- Special Review

Wow... even the Narrator is taking pot-shots at him.

ONE PIECE Ch. 771 Review

What starts as disturbing has a surprisingly heartwarming outcome.

AH! MY GODDESS! #2 -- Retro Review

Love Hurts.

BLEACH Ch. 610 Review

Ichibe's fate is just about as brutal and obvious as Samuel Jackson's in DEEP BLUE SEA.

Anime Caption Contest -- 12/26/14

Last Caption Contest of the Year, New Year's Day Theme!

BLEACH Ch. 610 Review

Ichibe's fate is just about as brutal and obvious as Samuel Jackson's in DEEP BLUE SEA.

HAYATE THE COMBAT BUTLER #1 -- Special Review

“God Bless Us, Every One”

ONE PIECE Ch. 771 Review

What starts as disturbing has a surprisingly heartwarming outcome.

Anime Caption Contest -- 12/26/14

Last Caption Contest of the Year, New Year's Day Theme!

AH! MY GODDESS! #2 -- Retro Review

Love Hurts.

HAYATE THE COMBAT BUTLER #2 -- Special Review

Wow... even the Narrator is taking pot-shots at him.

Top Editors
Mandatory Network

Submissions can take several hours to be approved.

Save ChangesCancel